Perle Systems Sds4 Manuel d'utilisateur Page 380

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 460
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 379
RADIUS and TACACS+ 379
RADIUS
16 Login-TCP-Port Response Indicates the TCP port with which the user is to be
connected when the Service-Type is set to
1
(Login) or
3 (Callback-Login).
19 Callback-Number Response Specifies the callback phone number. This is the
same implementation as 20 (Callback-ID), but
takes precedence if
20 is set.
20 Callback-ID Response Specifies the callback phone number. This is the
same implementation as
19 (Callback-Number), but
19 takes precedence if both are set.
22 Framed-Route Response When the PPP IPv4 interface comes up, the IOLAN
will add routes to the users PPP interface in the
same order they were received
25 Class Response Received attributes are send in the Accounting
Reply messages.
26 Vendor-Specific Response Perle’s defined attributes for line access rights and
user level. See
Perle RADIUS Dictionary Example
on page 384 for an example of this file.
Line Access Rights for port n (where n is the line
number):
Name: Perle-Line-Access-Port-n
Type: 100 + n
Data Type: Integer
Value: Disabled (0), ReadWrite(1), ReadInput(2),
ReadInputWrite (3), ReadOutput (4),
ReadOutputWrite (5), ReadOutputInput (6),
ReadOutputInputWrite (7)
Name: Perle-User-Level
Type: 100
Data Type: Integer
Value: Admin(1), Normal(2), Restricted(3),
Menu(4)
Name: Perle-Clustered-Port-Access
Type: 99
Data Type: Integer
Value: Disabled(0), Enabled(1)
27 Session-Timeout Response Maximum number of seconds the user will be
allowed to stay logged on.
28 Idle-Timeout Response Use this timer to close a connection because of
inactivity. When the Idle-Timeout expires, the
IOLAN will end the connection. The maximum
value is 4294967 seconds (about 49 days). A value
of 0 (zero) means the Idle-Timeout will not expire,
so the connection is permanently open.
31 Calling-Station-Id Response For reverse telnet and reverse ssh the IP address of
the client will be sent. All other server type do not
send this field.
32 NAS-Identifier Response If the identifier is configured then this field will be
sent.
Type Name Description
Vue de la page 379
1 2 ... 375 376 377 378 379 380 381 382 383 384 385 ... 459 460

Commentaires sur ces manuels

Pas de commentaire