Perle Systems Sds4 Manuel d'utilisateur télécharger pdf (Page 332)

100

101

331

Management

SFTP Tab Field Descriptions

You must have a SFTP server running on any host that you are uploading or downloading files

to/from.

These are global SFTP settings. They are used whenever the user specifies “SFTP” as the protocol to

be used for the file transfer.

Configure the following parameters:

Note:

Some combinations of cipher groups are not available on FIPS firmware versions.

SSH-1 protocol is not available on FIPS firmware versions.

Enable

Compression

Enables compression of all data. Compression of data is desirable on slow

connections, however on faster networks, compression will degrade overall

data transmission rates.

Default: Disabled

Auto Logon When checked, the IOLAN will automatically log into the SFTP server using

the Name field. If Keyboard Interactive is checked the IOLAN will also send

the configured Password field.

Default: Disabled

Name Enter the user name that will be used to automatically log into the SFTP server.

Password Enter the password that will be used to automatcially log in the SFTP server.

Host Select the host entry from the IOLANs host table which corresponds to the

SFTP server.

HTTP Tunnel Select the HTTP tunnel to be used for this traffic.

SSH 1 enable Enable to negotiation of the SSH1 protocol.

SSH1 Cipher Select the encryption cipher to be used if the SSH1 protocol is used. Valid

options are “3DES” or “Blowfish”.

SSH 2 enable Enable to negotiation of the SSH2 protocol.

SSH2 Cipher Select the encryption cipher(s) to be used if the SSH2 protocol is used. You can

provide up to five values in order of preference. Valid options are “3DES”,

“Blowfish”, “AES”, “CAST” and “Arcfour”.

1 2 ... 327 328 329 330 331 332 333 334 335 336 337 ... 459 460

Commentaires sur ces manuels

Pas de commentaire

Perle Systems Sds4 Manuel d'utilisateur Page 332

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Perle Systems Sds4