Perle Systems Sds4 Manuel d'utilisateur télécharger pdf (Page 64)

Configuration Methods 63

Command Line Interface

Overview

The Command Line Interface (CLI) is a command line option for IOLAN configuration/management.

See the Command Line Interface Reference Guide for a full breakdown of all the CLI commands and

their functionality.

Access Platforms

The CLI is accessed by any application that supports a Telnet or SSH session to the IOLAN’s IP

address, such as Putty, SecureCRT, or from a command prompt. You can also access the CLI from a

dumb terminal or PC connected to a serial port.

Features

The CLI supports the following features:

z You can access the IOLAN from any application that supports Telnet or SSH.

z The ability to clear the ARP table (cache).

z The ability to save a configuration file locally in text format, in addition to the binary format.

z For existing IOLAN+ customers, the native IOLAN+ CLI to be used by entering the iolan+

command. See your IOLAN User’s Guide for information on using the IOLAN+ CLI.

Connecting to the IOLAN Using the CLI

There are two ways you can access the IOLAN, through the network (Ethernet connection) or

through the serial connection. If you are accessing the IOLAN through the network, the IOLAN must

already have a known IP address configured; see

Using a Direct Serial Connection to Specify an IP

Address for information on configuring an IP address.

Through the Network

To connect to the IOLAN through the network to configure/manage it using the CLI, do the

following:

1. Start a Telnet or SSH session to the IOLAN’s IP address; for example:

telnet 10.10.201.100

2. You will get a Login: prompt. You can login as the admin user or as a user with Admin Level

rights. If the login is successful, you will get a prompt that displays the IOLAN model and

number of ports:

Password:

SDS2#

You will see a prompt that displays the model and number of the IOLAN. You are now ready to

start configuring/managing your IOLAN using the CLI.

Note:

The IOLAN+ CLI is not supported on IOLAN models with more than 16 ports or the

DS1/TS2 and medical unit models.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 459 460

Pas de commentaire

Perle Systems Sds4 Manuel d'utilisateur Page 64