Perle Systems Switch DS1 Manuel d'utilisateur télécharger pdf (Page 76)

Serial Port Profiles

Adding/Editing a Multihost Entry

When you click the Add or Edit button, the Host Entry window appears. The hosts in the multihost

list must already be defined. If you add a host that was defined with its fully qualified domain name

(FQDN), it must be resolvable by your configured DNS server.

Configure the following parameters:

Host Name

TCP Port

Primary Host Specify a preconfigured host that the serial device will communicate to through

the IOLAN.

Default: None

TCP Port Specify the TCP port that the IOLAN will use to communicate to the Primary

Host

Default: 0

Backup Host Specify a preconfigured host that the serial device will communicate to through

the IOLAN if the IOLAN cannot communicate with the

Primary Host.

Default: None

TCP Port Specify the TCP port that the IOLAN will use to communicate to the Backup

Host

Default: 10000

Specify the preconfigured host that will be in the multihost list.

Default: None

Specify the TCP port that the IOLAN will use to communicate to the Primary

Host

Default: 10000 + serial port number - 1 (so serial port 2 defaults to 10001)

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 245 246

Pas de commentaire

Perle Systems Switch DS1 Manuel d'utilisateur Page 76