Perle Systems Switch DS1 Manuel d'utilisateur télécharger pdf (Page 59)

Using DeviceManager and WebManager 59

Using DeviceManager to Connect to the IOLAN

Adding/Deleting IOLANs Manually

To permanently add/delete IOLANs to/from the IOLAN List, click the Add button. The following

window is displayed:

To permanently add the IOLAN to the IOLAN list, type in the IP address of the IOLAN and click the

Add button and enter the IPv4 or IPv6 address. To permanently delete the IOLAN from the IOLAN

list, select the IOLAN’s IP address and click the Delete button.

Logging in to the IOLAN

To log in to the IOLAN, double-click on the IOLAN in the Device Server List. You will be prompted

for the Admin Password (the default is

superuser).

If the authentication and connection are successful, the IOLAN’s Server Info window is displayed.

If you cannot connect to the IOLAN, you can highlight the IOLAN and click the Ping button to

verify that the DeviceManager can communicate with the IOLAN’s IP Address. If the ping times out,

then you might need to set up a Gateway in your IOLAN or verify that your network is

communicating correctly.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 245 246

Pas de commentaire

Perle Systems Switch DS1 Manuel d'utilisateur Page 59