Perle Systems P840 Manuel d'utilisateur télécharger pdf (Page 22)

3 Interfaces Reference

Pinout Information

Console Connector

The console connector on the P840 is a DCE interface on a RJ45 pinout. The supplied DB9 to RJ45 converter

should be used to connect to the DB9 connector of a DTE terminal. This connection will then provide access to the

built-in menu system.

If the console interface is to be connected to a modem or other DCE device, a standard RS-232 crossover converter

should be used.

The following table illustrates the console pinouts.

RJ45 connector

on unit (DCE)

DB9 connector

on converter (DCE)

RS-232

signal name

26CTS

34DTR

4 5 GND

52RxD

63TxD

78DSR

81CD

Figure 3-1 Rear View of the Console Connector

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 57 58

Pas de commentaire

Perle Systems P840 Manuel d'utilisateur Page 22