Perle Systems C-10GT-XFPH Manuel d'utilisateur

Perle 10GT Media Converter Modules Installation Guide C-10GT-SFP CM-10GT-SFP C-10GT-XFPH CM-10GT-XFPH

Perle C/CM-10GT Media Modules Installation Guide 10 AUTO-Config Jumper (CM models only) The Auto-Config jumper is located on the outer edge,

Perle C/CM-10GT Media Modules Installation Guide 11 Operation Status LED The Perle C/CM 10GT Media converters modules have three status LEDs

Perle C/CM-10GT Media Modules Installation Guide 12 LK1- Port 1 Activity On: Fiber link present. Blinking quickly: Fiber link present and rec

Perle C/CM-10GT Media Modules Installation Guide 13 Troubleshooting General  Ensure that the SFP+ or XFP module is inserted correctly into

Perle C/CM-10GT Media Modules Installation Guide 14 Loopback Test This mode is not used in conjunction with BILT. 1. If either media convert

Perle C/CM-10GT Media Modules Installation Guide 15 Technical Specifications Power Input/Consumption 9-30VDC SFP+ 1.1A Max, 0.8A at 12VD

Perle C/CM-10GT Media Modules Installation Guide 16 Compliance Information FCC This product has been found to comply with the limits for a C

Perle C/CM-10GT Media Modules Installation Guide 2 Overview This document contains instructions necessary for the installation and operation

Perle C/CM-10GT Media Modules Installation Guide 3 Getting to know your C/CM-10GT Media Converter Your C/CM-10GT Media Converter package cons

Perle C/CM-10GT Media Modules Installation Guide 4 Installation The default switch setting (all switches in the UP position) will work for mo

Perle C/CM-10GT Media Modules Installation Guide 5 DIP Switch Settings The DIP switches are located on the module. Note: Switch changes made

Perle C/CM-10GT Media Modules Installation Guide 6 Test Function (Switch 2 – Test Mode) Switch Position Type Up (default) Built In Link Tes

Perle C/CM-10GT Media Modules Installation Guide 7 Sequence of Events 1. The Local C/CM-10GT media converter module sends the Remote C/CM-10

Perle C/CM-10GT Media Modules Installation Guide 8 Fiber Fault Alert Sample Config Media Converter Module A Configuration Link Mode–Standard

Perle C/CM-10GT Media Modules Installation Guide 9 EEE (Energy Efficient Ethernet) Switch Position Mode Up (default) Enabled Down Disabled